Negotiable
The date of payment from buyers deliver within days
Heilongjiang
Long-term effective
2020-08-23 00:23
469
Company Profile
By certification [File Integrity]
Contact：qfytech(Mr.)
Email：
Telephone：
Phone：
Area：Heilongjiang
Address：Heilongjiang
Website：http://www.fy-altic.com/ http://qfytech.weijia-group.com/
Parameter
1. Material: low-Ferrum aluminum ingots; K2TiF6 (potassium fluotitanate); C powder
2. Formation of AlTiC: TiAl3; TiC
3. Shape of TiAl3: block and rod shape,mainly rod shape
4. Size of TiAl3: ＜200μm
5. Nucleation particle: TiC
Packing
1. Cut rod: Diameter isΦ9.5±0.3mm, 500-1000mm, 1 ton/pallet or wooden case
2. Coil rod: Diameter is Φ9.5±0.3mm, 185-210kg/coil, 3coils/pallet
Application
EC grade aluminum wire rod, aluminum cans alloy for body/lids, automotive trim parts, 7XXX alloys which contains Zr, Cr etc.
Specification |
Chemical components of Al-Ti-C (%) |
|||||||
Ti |
C |
Fe |
Si |
V |
Other each |
Other total |
Balance |
|
AlTi3C0.15 |
2.6-3.4 |
0.08-0.22 |
≦0.20 |
≦0.20 |
≦0.05 |
≦0.03 |
≦0.10 |
Aluminum |
AlTi5C0.18 |
4.5-5.5 |
0.13-0.23 |
≦0.20 |
≦0.20 |
≦0.05 |
≦0.03 |
≦0.10 |
Aluminum |
AlTi5C0.2 |
4.5-5.5 |
0.15-0.25 |
≦0.20 |
≦0.20 |
≦0.05 |
≦0.03 |
≦0.10 |
Aluminum |
AlTi5C0.2Pt |
4.5-5.5 |
0.15-0.25 |
≦0.20 |
≦0.20 |
≦0.05 |
≦0.03 |
≦0.10 |
Aluminum |
AlTi5C0.2La |
4.5-5.5 |
0.15-0.25 |
≦0.20 |
≦0.20 |
≦0.05 |
≦0.03 |
≦0.10 |
Aluminum |
Advantages of AlTiC
1. As far as the intermediate alloy production process is concerned, Al-Ti-C production process is pollution-free and is a typical energy-saving and emission-reduction product.
2. Compared with the purity of the intermediate alloy, because there is no potassium fluoborate as raw material, the Al-Ti-C intermediate alloy is not easy to produce salt inclusion.
3. Nucleating particles are released during the casting process, which can effectively refine equiaxed grains and prevent the formation of columnar grains
4. No TiB2 agglomeration to reduce inclusion content and eliminate oxide layer and defects on the surface
5. In terms of the influence of the number of second-phase particles, in pursuit of the same grain refinement effect, a smaller number of hard points can be introduced into the aluminum melt through Al-Ti-C intermediate alloy to avoid its potential adverse effects, which is more significant in the production of PS plate or double zero foil.
6. It is more advantageous to use Al-Ti-C intermediate alloy to refine grain when casting aluminum materials for nuclear industry that cannot contain boron.
7. Cost saving. In pursuit of the same refining effect, the addition amount of aluminum titanium carbon is generally less than that of aluminum titanium boron
Company Profile
Qinhuangdao Fengyue Science&Technology Co., Ltd. founded in 2007, is a quality aluminum master alloy manufacturer in Qinhuangdao, China. Our main products are Aluminum Tatanium Carbon and Aluminum Tatanium Boron master alloys.
With ISO9001: 2015 Quality Management System approved, we have professional testing staff and advanced testing equipment. Strict quality control system covers every step of the production, including the inspection of the raw material, production process supervision and product inspection. Products from every furnace are tested including chemical composition, product micro-structure and product grain refinement capability. And all the information is archived to build a product quality database, where the products quality data could be accessed and tracked.
Product Pictures
http://www.fy-altic.com/
